Engine A320

223 questions · tap an answer to check it

Learn this topic firstPower Plant: Engine, FADEC and Thrust LeversA320 Aircraft Systems course →

About this topic

Engine A320: 223 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from Engine A320

  1. The Full Authority Digital Engine Control (FADEC) controls which of the following functions:
    • A) Fuel metering
    • B) Engine limits
    • C) Automatic and manual starting.
    • D) All of the above
    Show answer

    D) All of the above
    FADEC System Functions 1. Control of Gas Generator Fuel flow control Acceleration and deceleration schedules Variable bleed valve and variable stator vane schedules Turbine clearance control Idle setting 2. Protection Against Engine Exceeding Limits N1 and N2 overspeed protection Monitoring of EGT during engine start 3. Power Management Automatic control of engine thrust rating Computation of thrust parameter limits

  2. The FADEC is normally powered by:
    • A) The RAT
    • B) Its own magnetic alternator
    • C) The normal aircraft electrical system
    Show answer

    B) Its own magnetic alternator
    Each powerplant has a FADEC (Full Authority Digital Engine Control) system. FADEC is a digital control system that performs complete engine management. FADEC has two-channel redundancy, with one channel active and one in standby. If one channel fails, the other automatically takes control. The system has a magnetic alternator for an internal power source. FADEC is mounted on the fan case. The Engine Interface Unit (E

  3. During an automatic start sequence; selecting the ENG MASTER switch to on:
    • A) Displays the ECAM engine page.
    • B) Initiates the start sequence.
    • C) Closes the pack valves
    • D) First two statements are correct
    Show answer

    D) First two statements are correct

  4. The FADEC has control during a manual engine start sequence except for:
    • A) The high pressure fuel valve.
    • B) The start valve.
    • C) An automatic abort
    Show answer

    C) An automatic abort
    Manual Engine Starting Sequence Passive monitoring of the engine Control of: Start valve HP fuel valve Ignition An automatic abort in automatic start only

  5. Continuous ignition is automatically provided during the following:
    • A) Flex or TO/GA thrust is selected on the ground.
    • B) ENG ANTI ICE switch is ON
    • C) Engine surge on stall occurs in flight.
    • D) Any of the above.
    Show answer

    D) Any of the above.