ENGINE & INSTRUMENTS

51 questions · tap an answer to check it

Learn this topic firstEngine InstrumentationInstruments course →

About this topic

ENGINE & INSTRUMENTS: 51 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from ENGINE & INSTRUMENTS

  1. What type of sensor is used to measure the output of a low pressure booster pump
    • A) bourdon tube
    • B) aneroid capsule
    • C) bellows
    • D) differential capsule
    Show answer

    C) bellows

  2. A vibration meter measures
    • A) frequency in Hz
    • B) amplitude at a given frequency
    • C) period in seconds
    • D) acceleration in g
    Show answer

    B) amplitude at a given frequency

  3. Which of the following are used to measure temperature 1. thermocouple 2. resistance 3. reactance 4. mercury
    • A) 1,2,3,4
    • B) 1,2, & 4
    • C) 2,3, & 4
    • D) 1,3,& 4
    Show answer

    B) 1,2, & 4

  4. A millivoltmeter measuring electromotive force between a hot and a cold junction of a thermocouple can be graduated to read temperature if: -
    • A) the hot junction is kept at a constant temperature
    • B) the cold junction is maintained at 15 degrees C
    • C) the hot junction is maintained at 15 degrees C
    • D) the cold junction is maintained at a constant temperature
    Show answer

    D) the cold junction is maintained at a constant temperature

  5. If both displays of an EICAS system fail what information will be displayed on the standby engine indicator
    • A) N1,EPR,N2
    • B) N1,EPR, EGT
    • C) N2,EPR, EGT
    • D) EGT,N1, FF
    Show answer

    B) N1,EPR, EGT