About this topic
HUMIDITY 1: 23 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from HUMIDITY 1
- Relative humidity depends on
- A) moisture content of the air only
- B) temperature of the air only
- C) moisture content and temperature of the air
- D) moisture content and pressure of the air
Show answer
C) moisture content and temperature of the air
Absolute Humidity is the weight of water vapour in unit volume of air. Absolute Humidity is usually expressed in gm/m3. Relative Humidity is a term used to describe the quantity of water vapour that exists in a gaseous mixture of air and water. Relative humidity is expressed as a percentage - When a given mass of air descends, what effect will it have on relative humidity?
- A) It increases.
- B) It remains constant.
- C) It increases up to 100%, and then remains stable
- D) It decreases.
Show answer
D) It decreases.
As the air descends it will be heated adiabatically and will be warmer than the air at a lower level adjacent to the surface. as the temperature increases, the relative humidity will decrease - Relative humidity at a given temperature is the relation between:
- A) water vapour weight and humid air volume
- B) dew point and air temperature
- C) actual water vapour content and saturated water vapour content
- D) water vapour weight and dry air weight
Show answer
C) actual water vapour content and saturated water vapour content
Relative Humidity is a term used to describe the quantity of water vapour that exists in a gaseous mixture of air and water. Relative humidity is expressed as a percentage and is calculated using the formula below. More simply, the relative humidity is the amount of water vapour present in a volume of air divided by the maximum amount of water vapour which that volume could hold at that temperature expressed as a per - The maximum amount of water vapour that the air can contain depends on the:
- A) air temperature
- B) relative humidity
- C) stability of the air
- D) dewpoint
Show answer
A) air temperature
This amount of space in the air that can hold water changes depending on the temperature and pressure. The maximum amount of water vapour that can be in the air depends on the air temperature - Which of the following changes of state is known as sublimation?
- A) Solid direct to liquid
- B) Liquid direct to solid
- C) Liquid direct to vapour
- D) Solid direct to vapour
Show answer
D) Solid direct to vapour
Freezing If the water droplet is cooled below zero, then it may change state again to ice. Melting The opposite change of state, from solid to liquid, is called melting Sublimation/Deposition Sublimation is the change of state directly from water vapour to ice without water droplets being formed. Latent heat is released. This process is also known as deposition. The change of state from ice directly to water vapour i