HYDRAULIC

75 questions · tap an answer to check it

Learn this topic firstHydraulic Pumps, Valves and ActuatorsAircraft Systems course →

About this topic

HYDRAULIC: 75 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from HYDRAULIC

  1. Modern aircraft hydraulic systems use?
    • A) Mineral based fluid.
    • B) Synthetic fluids.
    • C) Alcohol based fluids.
    • D) Vegetable based fluids.
    Show answer

    B) Synthetic fluids.

  2. A shuttle valve is used to?
    • A) Switch from one supply to another.
    • B) Switch from one service to another .
    • C) Operate components in sequence.
    • D) Move components backwards and forwards.
    Show answer

    A) Switch from one supply to another.

  3. One of the reasons for pressurising hydraulic reservoirs is to?
    • A) Prevent pump cavitation.
    • B) Prevent the collection of bubbles in the reservoir.
    • C) Prevent the ingress of moisture into the fluid.
    • D) Reduce the pressure rise necessary in the pump.
    Show answer

    A) Prevent pump cavitation.

  4. Hydraulic reservoirs are pressurised?
    • A) By ground crew before flight.
    • B) Using air from the air conditioning packs.
    • C) Using engine bleed air from gas turbine engines.
    • D) Uses a dedicated air compressor unit.
    Show answer

    C) Using engine bleed air from gas turbine engines.

  5. In addition to collecting excess fluid from the system, a hydraulic reservoir also?
    • A) Relieves excessive pressures.
    • B) Prevent pressure surges.
    • C) Minimises the amount of fluid that must be carried.
    • D) Keeps fluid up to working temperature.
    Show answer

    B) Prevent pressure surges.