About this topic
ICE ACCRETION: 20 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from ICE ACCRETION
- Hoar frost occurs on airframe in clear air when the temperature of air frame is
- A) below the frost point
- B) frost point
- C) just above the frost point
Show answer
A) below the frost point
Hoar frost is a white crystal deposit which appears similar to frost on the ground. It occurs in clear air. Hoar frost will form if the airframe temperature is below 0°C and the ambient temperature is lowered to saturation level. - In clouds at temperatures below 0°C and aircraft may encounter icing of the type
- A) only Glazed
- B) only Rime
- C) intermediate between those
Show answer
C) intermediate between those
Glaze ice is formed when LARGE supercooled drops spread over wings rime ice is formed WHEN SMALL supercooled drops spread over wings both happen under 0° Celsius flying through clouds - Rime is formed by freezing of ____ supercooled water droplets on airframe when air is flying through clouds
- A) Small
- B) Large
- C) Medium
Show answer
A) Small
Glaze ice is formed when LARGE supercooled drops spread over wings rime ice is formed WHEN SMALL supercooled drops spread over wings both happen under 0° Celsius flying through clouds - Glazed ice is formed by freezing of _____ supercooled water droplets on airframe and aircraft is flying through clouds
- A) Small
- B) Large
- C) Medium
Show answer
B) Large
Glaze ice is formed when LARGE supercooled drops spread over wings rime ice is formed WHEN SMALL supercooled drops spread over wings both happen under 0° Celsius flying through clouds - The _____ ice poses serious aviation hazard
- A) Rime
- B) Hoar Frost
- C) Glazed
Show answer
C) Glazed
If a large supercooled water droplet strikes an aircraft, it will start to freeze and this will release latent heat . This will delay the freezing process whilst part of the supercooled water droplet will flow back over the impact surface forming clear ice. The amount of a supercooled water droplet that freezes on impact is 1/80th of the droplet for each degree below freezing. Clear or glaze ice is a transparent form