KW BARO

69 questions · tap an answer to check it

Learn this topic firstThe Pressure AltimeterInstruments course →

About this topic

KW BARO: 69 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from KW BARO

  1. The hysteresis error of an altimeter varles substantially with the?
    • A) Time passed at a given altitude.
    • B) Mach number of the aircraft.
    • C) Aircraft altitude.
    • D) Static temperature.
    Show answer

    A) Time passed at a given altitude.

  2. When flying from a sector of warm air into one of colder air, the altimeter will?
    • A) Under read.
    • B) Be just as correct as before.
    • C) Show the actual height above ground.
    • D) Over read.
    Show answer

    D) Over read.

  3. At sea level, on a typical servo altimeter, the tolerance in feet from indicated must?
    • A) +/-60 feet.
    • B) +/-75 feet.
    • C) +/-30 feet.
    • D) +/-70 feet.
    Show answer

    C) +/-30 feet.

  4. The altitude indicated on board an aircraft flying in an atmosphere where all the atmosphere layers below the aircraft are cold is?
    • A) Equal to the standard altitude.
    • B) Lower than the real altitude.
    • C) The same as the real altitude.
    • D) Higher than the real altitude.
    Show answer

    D) Higher than the real altitude.

  5. The purpose of the vibrating device of an altimeter is to?
    • A) Allow damping of the measurement in the unit.
    • B) Reduce the hysteresis effect.
    • C) Reduce the effect of friction in the linkages.
    • D) Inform the crew of a failure of the instrument
    Show answer

    C) Reduce the effect of friction in the linkages.