KW ENGINE MONITORING

90 questions · tap an answer to check it

Learn this topic firstEngine InstrumentationInstruments course →

About this topic

KW ENGINE MONITORING: 90 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from KW ENGINE MONITORING

  1. The temperature measured by the CHT (Cylinder Head temperature) probe is The?
    • A) Temperature within the hottest cylinder, depending on its position in the engine block.
    • B) Average temperature within the whole set of cylinders.
    • C) Temperature of the exhaust gases.
    • D) Temperature of the carburetor to be monitored when the outside air temperature is between -5°C and 10° C.
    Show answer

    A) Temperature within the hottest cylinder, depending on its position in the engine block.

  2. The signal supplied by a transmitter fitted with a 3-phase AC generator, connected to RPM indicator, is a DC voltage varying with the RPM?
    • A) The indicator is a plain voltmeter with a rev/min scale measuring an AC voltage, The frequency of which varies with the RPM.
    • B) The indicaor converts the signal into square pulses which are the counted as an AC voltage varying with the RPM.
    • C) The indicator rectifies the signal via a diode bridge and is provided with a voltmeter a three-phase voltage, the frequency of which varies with the RPM.
    • D) The indicator is provided with a motor, which drives a magnetic tachometer.
    Show answer

    D) The indicator is provided with a motor, which drives a magnetic tachometer.

  3. The signal supplied by a transmitter fitted with a magnetic sensor, connected to an RPM indicator is a three-phase voltage frequency varies with RPM?
    • A) The indicator is provided with a motor which drives a magnetic tachometer a DC voltage varying with the RPM.
    • B) The indicator is a simple voltmeter with a rev/min scale measuring an AC voltage varying with the RPM?
    • C) The indicator rectifies the signal via a diode bridge and is provided with a voltmeter measuring an AC voltage, the frequency of which varies with the RPM.
    • D) The indicator converts the signal into pulses which are then counted.
    Show answer

    D) The indicator converts the signal into pulses which are then counted.

  4. A vibration indicator receives a signal from different sensors (accelerometers). It Indicates the?
    • A) Vibration period expressed in seconds.
    • B) Vibration amplitude at a given frequency.
    • C) Acceleration measured by the sensors, expressed in g.
    • D) Vibration frequency expressed in Hz.
    Show answer

    B) Vibration amplitude at a given frequency.

  5. The transmitter of RPM indicator may consist of: 1. A magnetic senor supplying an inducted AC voltage. 2. A DC generator supplying a DC voltage. 3. A single-phase AC generator supplying an AC voltage. 4. A three-phase AC generator supplying a three-phase voltage. The combination of correct statements is?
    • A) 1, 2, 3.
    • B) 1, 2, 3, 4.
    • C) 2, 3, 4.
    • D) 1, 4.
    Show answer

    B) 1, 2, 3, 4.