Kw performance Power required

88 questions · tap an answer to check it

Learn this topic firstClimb, Cruise and DescentPerformance course →

About this topic

Kw performance Power required: 88 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from Kw performance Power required

  1. If TAS is increased from 300 Kts to 400 Kts with no change in altitude, configuration, or weight, by what percentage will power required change?
    • A) Decrease by 1 35%.
    • B) Decrease by 35%.
    • C) lncrease by 135%.
    • D) lncrease by 235%.
    Show answer

    C) lncrease by 135%.

  2. What is the relationship between pewer required and TAS, as an aircraft accelerates above VMD?
    • A) Power required increases in direct proportion to TAS.
    • B) Power required increases in inverse proportion to TAS.
    • C) Power required increases in proportion to (TAS)3.
    • D) Power required increases in proportion to (TAS)2.
    Show answer

    C) Power required increases in proportion to (TAS)3.

  3. At what % of its stalling speed must a jet aircraft fly to achieve maximum endurance for a given fuel load?
    • A) 122%.
    • B) 132%.
    • C) 142%.
    • D) 152%.
    Show answer

    B) 132%.

  4. For a piston aircraft at constant weight, angle of attack, and configuration, what will be the effect of increasing altitude?
    • A) lncreased power and TAS will be required.
    • B) lncreased power will be required but at the same TAS.
    • C) Lower power will be required at the same TAS.
    • D) The same power will be required but at an increased TAS.
    Show answer

    A) lncreased power and TAS will be required.

  5. For a piston aircraft at a constant altitude, angle of attack, and configuration, what will be the effect of increasing weight?
    • A) More power will be required but at the same TAS.
    • B) More power will be required but at a higher TAS.
    • C) The same power will be required but at a higher TAS.
    • D) More power will be required but at a lower TAS.
    Show answer

    B) More power will be required but at a higher TAS.