LORAN C

6 questions · tap an answer to check it

Learn this topic firstLoran CRadio Navigation course →

About this topic

LORAN C: 6 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from LORAN C

  1. The principle of operation of Loran C is:
    • A) timing the interval transmitted and received pulses.
    • B) differential range by frequency comparison.
    • C) differential range by pulse transmissions.
    • D) differential range by phase comparison.
    Show answer

    C) differential range by pulse transmissions.
    LORAN-C is based on measuring the time difference of specific pulses between a pair of land based radio transmitters. One station, called a Master Station, sends a unique and constant pulse (in milliseconds) to at least two secondary stations. These stations grouped together are called a Chain.

  2. The frequency and waveband of LORAN C are:
    • A) 100 kHz, hectometric
    • B) 100 MHz, kilometric
    • C) 100 MHz, hectometric
    • D) 100 kHz, kilometric
    Show answer

    D) 100 kHz, kilometric
    frequency and waveband of LORAN-C (Long Range Navigation C) are as follows: Frequency: 100 kHz Waveband: The LORAN-C system operates in the low-frequency (LF) band, specifically between 90 kHz to 110 kHz. LORAN-C is a terrestrial-based navigation system that uses a network of radio transmitters to provide positioning information to aircraft and ships. The system works by measuring the time difference between signals

  3. The coverage of LORAN C is:
    • A) Specified areas only
    • B) Northern hemisphere only
    • C) Oceanic areas
    • D) Northern hemisphere oceanic areas
    Show answer

    A) Specified areas only
    Loran-C is a medium-range navigation system with good coverage in North America, Europe, and the Pacific Rim. It’s primarily used for coastal navigation, so it doesn’t provide worldwide coverage

  4. The principle of operation of Loran C is:
    • A) timing the interval between transmitted and received pulses.
    • B) differential range by frequency comparison.
    • C) differential range by pulse transmissions.
    • D) differential range by phase comparison.
    Show answer

    C) differential range by pulse transmissions.

  5. The frequency and waveband of LORAN C are:
    • A) 100 kHz, hectometric
    • B) 100 MHz, kilometric
    • C) 100 MHz, hectometric
    • D) 100 kHz, kilometric
    Show answer

    D) 100 kHz, kilometric