OXFORD ELECTRIC Circuit protection and capacitors

20 questions · tap an answer to check it

Learn this topic firstCircuit Protection and CapacitorsElectrics course →

About this topic

OXFORD ELECTRIC Circuit protection and capacitors: 20 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ELECTRIC Circuit protection and capacitors

  1. In a circuit fitted with a non trip free circuit breaker if a fault occurs and persists:
    • A) if the reset button is depressed and held in, the circuit will be made.
    • B) the trip button may be pressed to reset, but not permanently.
    • C) a non trip free circuit breaker can never be by-passed.
    • D) the reset button may be pressed to make the circuit permanent.
    Show answer

    A) if the reset button is depressed and held in, the circuit will be made.

  2. A trip-free circuit breaker that has tripped due to overload:
    • A) can be reset and held in during rectification.
    • B) can never be reset.
    • C) can be reset after overhaul.
    • D) maybe reset manually after fault has been cleared.
    Show answer

    D) maybe reset manually after fault has been cleared.

  3. Circuit breakers and fuses
    • A) are used in DC circuits only
    • B) are used in AC or DC circuits
    • C) are used in AC circuits only
    • D) are used in low current circuits only
    Show answer

    B) are used in AC or DC circuits

  4. A trip-free circuit breaker is one which:
    • A) cannot be reset by holding the lever in while the fault persists.
    • B) can be reset by holding the lever in while the fault persists.
    • C) must be held in during checks to find faults.
    • D) can be by passed.
    Show answer

    A) cannot be reset by holding the lever in while the fault persists.

  5. If the reset button is pressed in the trip-free circuit breaker, the contacts with the fault cleared will:
    • A) be made and kept made.
    • B) only be made if there is a fuse in the circuit.
    • C) reset itself only after a delay of 20 seconds.
    • D) not be made and the reset will remain inoperative.
    Show answer

    A) be made and kept made.