OXFORD ELECTRIC DC motors

10 questions · tap an answer to check it

Learn this topic firstDC Motors and ActuatorsElectrics course →

About this topic

OXFORD ELECTRIC DC motors: 10 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ELECTRIC DC motors

  1. Rotary actuators are used for:
    • A) undercarriage retraction.
    • B) centre of gravity assessment.
    • C) operation of fuel cocks.
    • D) movement of control surfaces.
    Show answer

    C) operation of fuel cocks.

  2. Actuator normal travel is controlled by:
    • A) a clutch.
    • B) limit micro switches.
    • C) mechanical indicators.
    • D) mechanical stops.
    Show answer

    B) limit micro switches.

  3. AC current from an engine driven generator is converted to DC current by:
    • A) a commutator
    • B) a convertor.
    • C) an alternator.
    • D) a rotary actuator.
    Show answer

    A) a commutator

  4. On a twin engined DC aircraft having two DC generators load sharing is achieved by:
    • A) equalising engine RPM’s
    • B) an equalising circuit to sense the difference and equalise the voltages of the two generators
    • C) synchronising relays and voltage coil tuners
    • D) an equalising circuit to sense the difference and equalise the field currents of the two generators
    Show answer

    B) an equalising circuit to sense the difference and equalise the voltages of the two generators

  5. Pilots are informed of rotary actuator positions by:
    • A) non return valves.
    • B) lights or dolls eye indicators.
    • C) travel indicators.
    • D) veger counters.
    Show answer

    B) lights or dolls eye indicators.