About this topic
OXFORD ELECTRIC Oscillators: 18 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from OXFORD ELECTRIC Oscillators
- The purpose of a basic Oscillator is to:
- A) amplify a signal
- B) attenuate a signal
- C) produce a sine wave from a DC input
- D) increase the frequency of a sine wave
Show answer
C) produce a sine wave from a DC input
- A basic oscillator consists of 1. amplifier 2. positive feedback path 3. negative feedback path 4. frequency determining circuit 5. DC supply 6. AC supply
- A) 1, 3, 4, 5.
- B) 1, 2, 4, 5.
- C) 1, 3, 4, 6.
- D) 1, 2, 3.
Show answer
B) 1, 2, 4, 5.
- An electrical resonant circuit is constructed from:
- A) esistors and inductors in series
- B) inductors and resistors in series or parallel
- C) nductors and resistors always in parallel
- D) apacitor and inductor which may be in parallel or series
Show answer
D) apacitor and inductor which may be in parallel or series
- When a parallel inductive capacitive circuit is operating at its resonant frequency:
- A) capacitive reactance is greater than inductive reactance
- B) inductive reactance is greater than capacitive reactance
- C) inductive reactance equals capacitive reactance and a large circulating current exists
- D) inductive reactance equals capacitive reactance and zero current flows in the circuit
Show answer
C) inductive reactance equals capacitive reactance and a large circulating current exists
- In a LC circuit the frequency where XL = XC is called: Look at the circuit at annex A and answer the following 3 questions
- A) Impedance (Z)
- B) Cancellation point
- C) Oscillation frequency (F0)
- D) Resonant frequency (F0)
Show answer
D) Resonant frequency (F0)