About this topic
OXFORD ELECTRIC Practical aircraft systems: 11 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from OXFORD ELECTRIC Practical aircraft systems
- The purpose of a synchronising bus bar is to:
- A) enable interconnections to be made between generator bus bars.
- B) supply essential services.
- C) monitor on-load currents.
- D) interconnect DC bus bars.
Show answer
A) enable interconnections to be made between generator bus bars.
- Fuses and circuit breakers are fitted:
- A) in DC circuits only.
- B) in both AC and DC circuits.
- C) in AC circuits only.
- D) only to protect the wiring.
Show answer
B) in both AC and DC circuits.
- Where the aircraft’s main electrical supply is A.C, DC requirements are met by:
- A) batteries.
- B) T.R.U.s.
- C) inverters.
- D) a static inverter.
Show answer
B) T.R.U.s.
- In a split bus system using non-paralleled constant frequency alternators as the primary power source:
- A) essential AC loads are supplied directly from Nº 1 AC bus bar.
- B) essential AC loads are supplied directly from Nº 2 AC bus bar.
- C) only non-essential AC loads are supplied from the AC bus bars.
- D) essential AC loads are normally supplied from Nº 1 AC bus bar via the changeover relay.
Show answer
D) essential AC loads are normally supplied from Nº 1 AC bus bar via the changeover relay.
- In a split bus system using non-paralleled constant frequency alternators as the primary power source, if both alternators fail:
- A) all non-essential services are lost.
- B) all non- essential services will be supplied direct from the battery bus bar.
- C) all non-essential services will be supplied from the static inverter.
- D) essential DC consumers only will be supplied from the Nº1 T.R.U., all other DC services will be lost.
Show answer
A) all non-essential services are lost.