About this topic
OXFORD ELECTRIC Transformers : 7 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from OXFORD ELECTRIC Transformers
- Instrument transformers normally:
- A) Convert 14 volts DC to 26 volts AC
- B) Reduce the A.C supply to 26 volts for some instruments.
- C) Change 115 volts to 200 volts for engine instruments.
- D) Convert 28 volts DC to 28 volts AC
Show answer
B) Reduce the A.C supply to 26 volts for some instruments.
- A step-up transformer is one in which the number of turns on the secondary winding is:
- A) the same as the primary if the cable diameter is the same
- B) greater than that on the primary.
- C) less than on the primary
- D) always the same as on the primary
Show answer
B) greater than that on the primary.
- A transformer which halves the voltage will have
- A) twice as many turns on the secondary as on the primary
- B) half as many turns on the secondary as on the primary
- C) half as much current flowing in the secondary as in the primary
- D) four times as many turns on the secondary as on the primary.
Show answer
B) half as many turns on the secondary as on the primary
- The power output of a transformer is:
- A) in proportion to the transformation ratio
- B) in inverse proportion to the transformation ratio.
- C) the same as the power input.
- D) increased in a step up transformer
Show answer
C) the same as the power input.
- With no load across the output terminals of a transformer:
- A) the current flow will be maximum.
- B) the current flow will be negligible
- C) the current will be in phase with the voltage
- D) the voltage in the primary will be always greater than the secondary
Show answer
B) the current flow will be negligible