OXFORD ENGINES Combustion chambers

10 questions · tap an answer to check it

Learn this topic firstCombustion ChambersEngines course →

About this topic

OXFORD ENGINES Combustion chambers: 10 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ENGINES Combustion chambers

  1. The ratio of air to kerosene to give the greatest heat release during combustion is:
    • A) 45 : 1.
    • B) 130 : 1.
    • C) 12.5 : 1.
    • D) 15 : 1.
    Show answer

    D) 15 : 1.

  2. One advantage of an annular combustion chamber system is that:
    • A) The diameter of the engine is reduced.
    • B) There is unrestricted airflow at maximum r.p.m.
    • C) There are no flame propagation problems.
    • D) The air casing area is greater.
    Show answer

    C) There are no flame propagation problems.

  3. Of the total airflow entering the combustion chamber the percentage that is mixed with the fuel and burnt is:
    • A) 10%
    • B) 40%
    • C) 20%
    • D) 60%
    Show answer

    C) 20%

  4. The combustion chamber drain valve is closed:
    • A) By combustion chamber gas pressure.
    • B) By a return spring.
    • C) By 12th stage compressor air pressure.
    • D) During a blow out cycle.
    Show answer

    A) By combustion chamber gas pressure.

  5. A cannular combustion system is:
    • A) A set of flame tubes, each of which is mounted in a separate air casing.
    • B) A set of flame tubes enclosed in a common air casing.
    • C) One common flame tube enclosed in a common air casing.
    • D) Superior to the annular system because it only requires one igniter.
    Show answer

    B) A set of flame tubes enclosed in a common air casing.