OXFORD ENGINES Cooling

6 questions · tap an answer to check it

Learn this topic firstPiston Engine CoolingEngines course →

About this topic

OXFORD ENGINES Cooling: 6 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ENGINES Cooling

  1. The most efficient method for cooling a piston engine is to use_____________. However, the most common method of cooling is to use_________ because of the _________ involved.
    • A) air cooling liquid cooling reduced costs
    • B) liquid cooling air cooling reduced costs
    • C) fuel cooled air cooling reduced costs
    • D) liquid cooling fuel cooling reduced costs
    Show answer

    B) liquid cooling air cooling reduced costs

  2. At take off Cowl flaps should be selected:
    • A) Fully closed to decrease drag.
    • B) Open
    • C) Partially closed
    • D) Fully closed to increase drag.
    Show answer

    B) Open

  3. A typical piston engine has a maximum thermal efficiency of:
    • A) 70%
    • B) 80%
    • C) 90%
    • D) 30%
    Show answer

    D) 30%

  4. In a four cylinder in line engine air cooled, (No 1, 2, 3, 4 from the front) the coolest cylinder while running will be:
    • A) 1
    • B) 2
    • C) 3
    • D) 4
    Show answer

    A) 1

  5. The device utilised to measure temperature on a piston engine is:
    • A) Thermometer.
    • B) Barometer.
    • C) Thermocouple.
    • D) Thermostat.
    Show answer

    C) Thermocouple.