OXFORD ENGINES Fuel

15 questions · tap an answer to check it

Learn this topic firstPiston Engine Fuel and Fuel SystemsEngines course →

About this topic

OXFORD ENGINES Fuel: 15 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ENGINES Fuel

  1. A fuel grade which is used in typical aircraft engines is:
    • A) D.T.D. 585/100
    • B) D.E.R.D. 2479
    • C) AVGAS 100
    • D) D.E.R.D. 2484
    Show answer

    C) AVGAS 100

  2. The "anti-knock" value of a fuel is its:
    • A) Degree of resistance to pre-ignition.
    • B) Resistance to adiabatic combustion.
    • C) Ability to oppose burning.
    • D) Resistance to detonation.
    Show answer

    D) Resistance to detonation.

  3. The differences between AVGAS 100 and AVGAS 100LL are:
    • A) Colour - Same, Anti-knock value - Same
    • B) Colour - Same, Anti-knock value - Different
    • C) Colour - Different, Anti-knock value - Same
    • D) Colour - Different, Anti-knock value - Different
    Show answer

    C) Colour - Different, Anti-knock value - Same

  4. The Octane rating of a fuel is determined by comparison with mixtures of:
    • A) Methane and orthodentine.
    • B) Heptane and iso octane.
    • C) Methane and iso octance.
    • D) Heptane and orthodentine.
    Show answer

    B) Heptane and iso octane.

  5. In the internal combustion engine, detonation occurs due to:
    • A) The use of too high an R.P.M. with too little manifold pressure.
    • B) The use of the wrong grade of oil.
    • C) The cylinder temperatures and pressures being too low.
    • D) Excessive combustion temperatures and pressures.
    Show answer

    D) Excessive combustion temperatures and pressures.