OXFORD ENGINES Ignition

10 questions · tap an answer to check it

Learn this topic firstPiston Engine IgnitionEngines course →

About this topic

OXFORD ENGINES Ignition: 10 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ENGINES Ignition

  1. The spark appears at the plug electrodes when:
    • A) The contact breaker closes.
    • B) The contact breaker opens.
    • C) The contact breaker stays open.
    • D) The magneto switch is made.
    Show answer

    B) The contact breaker opens.

  2. The ignition switch is fitted in:
    • A) The primary coil circuit.
    • B) The secondary coil circuit.
    • C) The engine starter motor circuit.
    • D) The battery circuit.
    Show answer

    A) The primary coil circuit.

  3. When the ignition switch is placed in the ‘ON’ position it:
    • A) Isolates the breaker points.
    • B) Makes the engine starter motor circuit.
    • C) ‘Earths’ or ‘grounds’ the secondary winding.
    • D) Breaks the primary to earth circuit.
    Show answer

    D) Breaks the primary to earth circuit.

  4. The purpose of a condenser as fitted in a magneto is:
    • A) To assist in the rapid collapse of the primary current and prevent arcing at the contact breaker points.
    • B) To prevent the rapid collapse of the primary circuit and arcing at the points.
    • C) To reduce the high tension voltage of the secondary circuit.
    • D) To earth the primary circuit.
    Show answer

    A) To assist in the rapid collapse of the primary current and prevent arcing at the contact breaker points.

  5. The engine is checked for dead cut at:
    • A) A power check.
    • B) Slow running.
    • C) Cruising RPM.
    • D) Full throttle.
    Show answer

    B) Slow running.