OXFORD ENGINES Lubrication

10 questions · tap an answer to check it

Learn this topic firstPiston Engine LubricationEngines course →

About this topic

OXFORD ENGINES Lubrication: 10 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ENGINES Lubrication

  1. From the following list select the correct combination of statements. The primary task of the lubrication is to: 1. Reduce friction 2. Cool the engine 3. Clean the engine 4. Reduce component wear 5. Act as a hydraulic medium
    • A) 1 and 3
    • B) 2 and 5
    • C) 1 and 4
    • D) 1 and 5
    Show answer

    C) 1 and 4

  2. In a piston engine dry sump oil system, the oil temperature and pressure are sensed:
    • A) When the oil is leaving the sump.
    • B) For the temperature when the oil is leaving the tank, and for the pressure when the oil is leaving the pressure pump.
    • C) For the oil temperature when the oil is entering the tank and for the pressure when it is entering the pressure pump.
    • D) At the same point.
    Show answer

    B) For the temperature when the oil is leaving the tank, and for the pressure when the oil is leaving the pressure pump.

  3. Oil returning to the oil tank is filtered by:
    • A) The oil pressure filter.
    • B) The oil tank filter.
    • C) A micron size multi-bore filters assembly.
    • D) The scavenge filter.
    Show answer

    D) The scavenge filter.

  4. The purpose of the crankcase breather is to:
    • A) Maintain the pressure in the oil tank at atmospheric pressure.
    • B) Ease the task of the oil scraper ring.
    • C) Prevent pressure building up inside the crankcase.
    • D) Prevent distortion of the crankcase.
    Show answer

    C) Prevent pressure building up inside the crankcase.

  5. The most probably cause of small fluctuations in the oil pressure would be:
    • A) Lack of oil.
    • B) The pressure relief valve sticking.
    • C) Air in the oil tank.
    • D) The scavenge pump working at a greater capacity than the pressure pump.
    Show answer

    B) The pressure relief valve sticking.