About this topic
OXFORD POF high speed flight: 25 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from OXFORD POF high speed flight
- Identify which of the following is the correct formula for Mach number:
- A) TAS/Ma = constant
- B) M = IAS/a
- C) TAS = M/a
- D) M = TAS x a
Show answer
A) TAS/Ma = constant
TAS / M × a = constant. This expression is a rearrangement of the standard Mach number formula M=TAS/a. Rewriting it gives TAS / M × a= constant, which holds true under isentropic flow conditions.It implies that for a given Mach number and speed of sound, the true airspeed (TAS) maintains a proportional relationship. - For an aircraft climbing at a constant IAS the Mach number will:
- A) increase.
- B) decrease.
- C) remain constant.
- D) initially show an increase, then decrease.
Show answer
A) increase.
As an aircraft climbs at a constant IAS (Indicated Airspeed): Air density and temperature decrease with altitude. This causes the speed of sound to decrease. Since Mach = TAS / local speed of sound, and TAS increases with altitude (at constant IAS), and the speed of sound decreases, Mach number increases with altitude. So, even though IAS remains constant, Mach number increases during the climb. - The term ‘transonic speed’ for an aircraft means:
- A) speeds where the airflow is completely subsonic.
- B) speeds where the airflow is completely supersonic.
- C) speeds where the airflow is partly subsonic and partly supersonic.
- D) speeds between M 0.4 and M 1.0
Show answer
C) speeds where the airflow is partly subsonic and partly supersonic.
The transonic speed range typically refers to aircraft speeds between Mach 0.75 and Mach 1.2, though exact boundaries can vary slightly. In this range: Some portions of airflow over the aircraft (especially over the wings) are subsonic, while others are supersonic. This mixed flow condition causes the formation of shock waves, resulting in increased drag and potential stability/control issues. - At M 0.8 a wing has supersonic flow between 20% chord and 60% chord. There will be a shockwave:
- A) at 20% chord only.
- B) at 20% chord and 60% chord.
- C) at 60% chord only.
- D) forward of 20% chord.
Show answer
C) at 60% chord only.
At Mach 0.8, when the wing experiences supersonic flow between 20% chord and 60% chord, the shockwave forms at the point where the airflow transitions from supersonic back to subsonic. This transition occurs at the downstream edge of the supersonic flow region, which is around the 60% chord position. Therefore, the shockwave will occur only at 60% chord, not at the start of the supersonic flow at 20% chord. - As air flows through a shockwave:
- A) static pressure increases, density decreases, temperature increases.
- B) static pressure increases, density increases, temperature increases.
- C) static pressure decreases, density increases, temperature decreases.
- D) static pressure decreases, density decreases, temperature decreases.
Show answer
B) static pressure increases, density increases, temperature increases.
When air flows through a shockwave, it undergoes a sudden and drastic change in flow properties. Specifically: Static pressure increases because the shock compresses the air. Density increases due to the compression of the air molecules. Temperature increases because the compression raises the internal energy of the air. This behavior is characteristic of a normal shockwave in compressible flow.