About this topic
OXFORD SYSTEMS FUSELAGE WINGS AND STABILISING SURFACES: 20 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from OXFORD SYSTEMS FUSELAGE WINGS AND STABILISING SURFACES
- What is the purpose of the wing main spar?
- A) To withstand bending and torsional loads.
- B) To withstand compressive and torsional loads.
- C) To withstand compressive and shear loads.
- D) To withstand bending and shear loads.
Show answer
A) To withstand bending and torsional loads.
The wing main spar is the primary structural member of the wing, designed to resist the major loads encountered during flight. It endures bending loads caused by aerodynamic lift acting upwards and weight acting downwards, as well as torsional loads resulting from aerodynamic twisting forces. These combined stresses require both strength and rigidity in the spar’s construction. - What is the purpose of wing ribs?
- A) To withstand the fatigue stresses.
- B) To shape the wing and support the skin.
- C) To house the fuel and the landing gear.
- D) To provide local support for the skin.
Show answer
B) To shape the wing and support the skin.
Wing ribs play a vital structural role by maintaining the aerofoil shape of the wing and supporting the skin, spars, and stringers against buckling. They also help distribute concentrated loads from components like engines, landing gear, and control surfaces into the skin and spars. While they do provide local support, their main function is more comprehensive. - What is the purpose of stringers?
- A) To absorb the torsional and compressive stresses.
- B) To produce stress risers and support the fatigue metres.
- C) To prevent buckling and bending by supporting and stiffening the skin.
- D) To support the primary control surfaces.
Show answer
C) To prevent buckling and bending by supporting and stiffening the skin.
Stringers are longitudinal stiffeners added to aircraft structures to support and stiffen the skin, especially when pure monocoque designs are not strong enough. They run along the fuselage or wing, connecting frames and helping the skin resist buckling and bending under load. - The airframe structure must remain substantially intact after experiencing:
- A) the design ultimate load times a 1.5 safety factor.
- B) the design limit load plus the design ultimate load.
- C) three times the safety factor.
- D) the design limit load times a 1.5 factor of safety.
Show answer
D) the design limit load times a 1.5 factor of safety.
The airframe structure must remain substantially intact after experiencing the Design Limit Load (DLL) multiplied by a 1.5 factor of safety, as required by design standards. This ensures the structure can endure unforeseen stresses without failure. This value defines the Design Ultimate Load (DUL) the structure must safely withstand. - In the construction of airframes the primary purpose of frames or formers is to:
- A) provide a means of attaching the stringers and skin panels.
- B) oppose hoop stresses and provide shape and form to the fuselage.
- C) form the entrance door posts.
- D) support the wings.
Show answer
B) oppose hoop stresses and provide shape and form to the fuselage.
In airframe construction, the primary purpose of frames or formers is to oppose hoop stresses and provide shape and form to the fuselage. In monocoque structures, the skin bears the loads, while frames or formers maintain the circular or oval cross-sectional shape and resist internal pressure forces.