Pneumatic A320

79 questions · tap an answer to check it

Learn this topic firstPneumatic and Bleed AirA320 Aircraft Systems course →

About this topic

Pneumatic A320: 79 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from Pneumatic A320

  1. Engine bleed air temperature is controlled by:
    • A) Engine oil.
    • B) A pre-cooler that uses fan air.
    • C) Conditioned air from the mixing unit
    Show answer

    B) A pre-cooler that uses fan air.

  2. If BMC1 fails BMC2 takes over all monitoring functions except:
    • A) Engine 1 and APU leak detection.
    • B) Overheat detection
    • C) Automatic crossbleed valve control.
    Show answer

    A) Engine 1 and APU leak detection.

  3. Bleed air normally comes from the _______ of the engine.
    • A) High pressure stage.
    • B) Intermediate stage
    • C) Low pressure stage.
    Show answer

    B) Intermediate stage

  4. In flight if the air pressure is insufficient even with the HP valve open:
    • A) The engine spools up automatically.
    • B) Engine power has to be increased by the pilot.
    • C) Push the High Pressure P/B on the ovhd panel.
    Show answer

    A) The engine spools up automatically.

  5. The pressure regulating and shutoff valve will close if _______ pressure is _______ or _______ airflow occurs
    • A) Downstream / low / reverse
    • B) Downstream / High / reverse
    • C) Upstream / low / reverse
    Show answer

    C) Upstream / low / reverse