About this topic
Power available and power required: 75 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from Power available and power required
- If TAS is increased from 300 Kts to 400 Kts with no change in altitude, configuration, or weight, by what percentage will power required change?
- A) Decrease by 135%.
- B) Decrease by 35%.
- C) Increase by 135%.
- D) Increase by 235%.
Show answer
C) Increase by 135%.
- What is the relationship between power required and TAS, as an aircraft accelerates above VMD?
- A) Power required increases in direct proportion to TAS.
- B) Power required increases in inverse proportion to TAS.
- C) Power required increases in proportion to (TAS)3.
- D) Power required increases in proportion to (TAS)2.
Show answer
C) Power required increases in proportion to (TAS)3.
- At what % of its stalling speed must a jet aircraft fly to achieve maximum endurance for a given fuel load?
- A) 122%.
- B) 132%.
- C) 142%.
- D) 152%
Show answer
B) 132%.
To achieve maximum endurance, a jet aircraft must fly at a speed that results in the lowest fuel consumption over time. In a jet engine, the fuel flow is directly proportional to thrust, and during straight and level flight, the thrust required equals the drag. The key to endurance is minimizing drag, since that minimizes thrust, and therefore fuel flow. The speed at which this occurs is called the minimum drag speed - For a piston aircraft at constant weight, angle of attack, and configuration, what mill be the effect of Increasing altitude?
- A) lncreased power and TAS will be required.
- B) Increased power will be required but at the same TAS.
- C) Lower power will be required at the same TAS.
- D) The same power will be required but at an increased TAS.
Show answer
A) lncreased power and TAS will be required.
- For a piston aircraft at a constant altitude, angle of attack, and configuration, what will be the effect of increasing weight?
- A) More power will be required but at the same TAS.
- B) More power will be required but at a higher TAS.
- C) The same power will be required but at a higher TAS.
- D) More power will be required but at a lower TAS.
Show answer
B) More power will be required but at a higher TAS.