POWER PLANT AND SYSTEM MONITORING

5 questions · tap an answer to check it

Learn this topic firstEngine InstrumentationInstruments course →

About this topic

POWER PLANT AND SYSTEM MONITORING: 5 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from POWER PLANT AND SYSTEM MONITORING

  1. What type of sensor is used to measure the output of a low pressure booster pump:
    • A) bourdon tube
    • B) aneroid capsule
    • C) bellows
    Show answer

    A) bourdon tube

  2. The "Bourdon tube" is used to measure:
    • A) fuel flow
    • B) vibrations
    • C) pressure
    Show answer

    C) pressure

  3. An aircraft has a compensated capacitance fuel contents gauging system and is refueled so that the total fuel contents are 76,000kg at a temperature of 18 degrees C and an S.G. of 0.81. whilst the aircraft is parked and temperature increases to 26 degrees C and the S.G. becomes 0.80. the indicated fuel contents have:
    • A) decreased by 5%
    • B) increased by 10%
    • C) remained the same
    Show answer

    B) increased by 10%

  4. Which of the following are used to measure temperature? 1. Thermocouple 2. Resistance 3. Reactance 4. Mercury
    • A) 1,2,3,4
    • B) 1,2&4
    • C) 1,3&4
    Show answer

    B) 1,2&4

  5. The two principal types of direct reading pressure gauge are:
    • A) the Bourdon tube type and the capsule operated type
    • B) capacitance type and bellows
    • C) manifold pressure type and engine pressure type
    Show answer

    A) the Bourdon tube type and the capsule operated type