About this topic
PRESSURE FUEL AND TEMPERATURE GAUGE( 1428-1487): 60 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from PRESSURE FUEL AND TEMPERATURE GAUGE( 1428-1487)
- If a manifold pressure gauge consistently registers atmospheric pressure, the cause is probably
- A) ice in induction system.
- B) leak in pressure gauge line
- C) too high float level.
- D) fuel of too low volatility.
Show answer
B) leak in pressure gauge line
- A manifold pressure gauge of a piston engine measures :
- A) absolute airpressure entering the carburettor.
- B) fuel pressure leaving the carburettor.
- C) vacuum in the carburettor
- D) absolute pressure in intake system near the inlet valve
Show answer
D) absolute pressure in intake system near the inlet valve
- Different pressure sensors are used according to the intensity of the pressure measured (low, medium or high)Classify the following sensors by order of increasing pressure for which they are suitable :1- bellows type2- Bourdon tube type3- aneroid capsule type
- A) 1,2,3
- B) 3,2,1
- C) 2,1,3
- D) 3,1,2
Show answer
D) 3,1,2
- Among the following engine instruments, the one operating with an aneroid pressure diaphragm is the :
- A) oil pressure gauge.
- B) fuel pressure gauge
- C) oil thermometer.
- D) manifold pressure gauge.
Show answer
D) manifold pressure gauge.
- The pressure probe used to measure the pressure of a low pressure fuel pump is:
- A) an aneroid capsule.
- B) a bellows sensor.
- C) a Bourdon tube.
- D) a differential capsule.
Show answer
A) an aneroid capsule.