About this topic
PROPELLER: 40 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from PROPELLER
- The procedure for un-feathering a propeller is to?
- A) Release the blade latch.
- B) Operate the un-feathering electric pump.
- C) Increases TAS before using the electric un-feathering pump.
- D) Decreases TAS before operating the un-feathering pump.
Show answer
C) Increases TAS before using the electric un-feathering pump.
- The purpose of a synchroscope is to?
- A) Indicate the RPM of each engine relative to that of that of the master engine.
- B) Indicate the RPM of each engine.
- C) Indicate the RPM of each propeller.
- D) Indicate the RPM of each propeller relative to that of the master propeller.
Show answer
D) Indicate the RPM of each propeller relative to that of the master propeller.
- What is propeller blade angle?
- A) Between the chord line of the propeller blades and the axis of rotation,
- B) Between the axis of rotation and the plane of rotation.
- C) Between the chord line of the propeller blades and the plane of rotation.
- D) Between the chord line of the blades and the relative airflow.
Show answer
C) Between the chord line of the propeller blades and the plane of rotation.
- Propeller blades are twisted in order to?
- A) Ensure constant blade angle along the span.
- B) Ensure constant angle of attack along the span.
- C) Ensure an acceptable angle of attack along the span.
- D) Prevent tip stall due to spanwise airflow.
Show answer
C) Ensure an acceptable angle of attack along the span.
- The RPM lever is used to control the indications on the ...... while the fuel lever is used to control indications on the ......? 1. MAP gauge. 2. Tachometer. 3. ASI. 4. EPR gauge.
- A) 1,2.
- B) 2,1.
- C) 1,3.
- D) 2,4.
Show answer
B) 2,1.