About this topic
Revision Questions: 229 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from Revision Questions
- What happens to the speed for Vx and Vy with increasing altitude?
- A) Both remain constant
- B) Vx remains constant and Vy increases.
- C) Vx increases and Vy remains constant.
- D) Vx remains constant and Vy decreases.
Show answer
D) Vx remains constant and Vy decreases.
- The affect of a contaminated runway on the field limit mass :
- A) Decreased weight, increased V1, increased VR
- B) Decreased weight, same V1, increased VR.
- C) Decreased weight, same V1, same VR.
- D) Decreased weight, decreased V1, decreased VR.
Show answer
D) Decreased weight, decreased V1, decreased VR.
- When operating with anti-skid inoperative:
- A) Both landing and take off performance will be affected.
- B) Only landing performance will be affected.
- C) Only take off performance will be affected.
- D) Neither take off or landing performance will be affected.
Show answer
A) Both landing and take off performance will be affected.
- Referring to Fig. 4.24. Why does the curve for an equivalent weight of 35 000 kg, only start 4 mins after engine failure?
- A) All the curves start at the same point higher up
- B) At that altitude the engine takes longer to spool down after failure.
- C) At that weight the aircraft has a higher TAS and therefore more momentum
- D) At that weight the aircraft takes longer to slowdown to the optimum drift down speed.
Show answer
D) At that weight the aircraft takes longer to slowdown to the optimum drift down speed.
- With which conditions would one expect Vmc to be the lowest?
- A) Cold temp, low altitude, low humidity
- B) Hot temp, low pressure altitude, high humidity.
- C) Hot temp, high pressure altitude, high humidity.
- D) Cold temp, high altitude, low humidity.
Show answer
C) Hot temp, high pressure altitude, high humidity.