About this topic
RNAV: 53 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from RNAV
- Which of the following statements regarding B-RNAV is correct?
- A) For 95% of the flight time, the track keeping accuracy must not exceed 5 nm.
- B) B-RNAV is only applicable when flying in TMAs.
- C) In case of B-RNAV, RNPI is required.
- D) B-RNAV can be used up to FL95. Above FL95 P-RNAV is required.
Show answer
A) For 95% of the flight time, the track keeping accuracy must not exceed 5 nm.
- Which statement about RNAV is correct?
- A) RNAV route are only used in terminal areas in order to make more efficient use of the approach and landing facilities of an airport.
- B) A method of navigation which permits aircraft operation on any desired flight path.
- C) In general RNAV routes coincide with standard route in order to make optimum use of the available VOR/DME stations.
- D) All waypoints of RNAV routes are called phantom stations.
Show answer
B) A method of navigation which permits aircraft operation on any desired flight path.
- The IRS is a self-contained system because?
- A) It operates independently of navigational aids outside the aircraft.
- B) It operates off its own power supply.
- C) The calculation of the position does not require any software.
- D) The system generates a warning in case of a failure.
Show answer
A) It operates independently of navigational aids outside the aircraft.
- Which component of an Area Navigation System displays the Cross Track Distance?
- A) Attitude Display.
- B) DME Indicator.
- C) Navigation Display.
- D) Radio Magnetic Indicator.
Show answer
C) Navigation Display.
- A 3-dimension RNAV system has capability in?
- A) The horizontal plane and the cruise management system.
- B) The horizontal plane and the management system.
- C) The horizontal plane, the vertical plane, and the timing funtion.
- D) The horizontal plane and the vertical plane.
Show answer
D) The horizontal plane and the vertical plane.