Stability and manoeuvrability

100 questions · tap an answer to check it

Learn this topic firstDynamic StabilityPrinciples of Flight course →

About this topic

Stability and manoeuvrability: 100 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from Stability and manoeuvrability

  1. What is short period mode?
    • A) Pilot induced oscillation.
    • B) Oscillation about the lateral axis.
    • C) Oscillation about the longitudinal axis.
    • D) Oscillation about the normal axis.
    Show answer

    B) Oscillation about the lateral axis.
    Short period mode refers to a high-frequency oscillation of an aircraft that occurs about the lateral axis, which affects the aircraft’s pitch (nose-up or nose-down motion). Despite being a longitudinal motion, the axis of rotation is lateral. It typically happens rapidly (short duration cycles), making it difficult for the pilot to correct manually. It is not a pilot-induced oscillation, but an inherent dynamic mode

  2. Where is the aft C of G limit of an aircraft?
    • A) Behind the neutral point.
    • B) Ahead of the neutral point.
    • C) On the neutral point.
    • D) On the manoeuvre point.
    Show answer

    B) Ahead of the neutral point.
    The aft Centre of Gravity (C of G) limit of an aircraft is located ahead of the neutral point to ensure positive longitudinal static stability. If the C of G moves behind the neutral point, the aircraft becomes statically unstable, making it difficult or even dangerous to control.

  3. At what position on an aircraft must the C of G be to make it neutrally longitudinally stable during pull up manoeuvres?
    • A) The neutral point.
    • B) The transition point.
    • C) The aerodynamic centre.
    • D) The manoeuvre point.
    Show answer

    D) The manoeuvre point.
    The manoeuvre point is the position on an aircraft where the Centre of Gravity (C of G) must be located to make the aircraft neutrally longitudinally stable during pull-up manoeuvres. At this point, the aircraft does not exhibit restoring or diverging pitching tendencies when subjected to rapid changes in angle of attack, making it marginally stable for manoeuvring conditions.

  4. Which of the following contribute to lateral stability?
    • A) Anhedral, sweepback, high wing, high fin.
    • B) Dihedral, sweepback, low wing, high fin.
    • C) Anhedral, aspect ratio, high wing, ventral fin.
    • D) Dihedral, sweepback, high wing, high fin.
    Show answer

    D) Dihedral, sweepback, high wing, high fin.
    Lateral stability refers to an aircraft’s ability to resist rolling motions and return to level wings after a disturbance. Contributors to lateral stability: Dihedral: Increases lateral stability by generating a restoring moment when the aircraft rolls. Sweepback: Enhances lateral stability by increasing lift on the lowered wing during a roll. High wing: Provides a pendulum effect, improving roll stability. High fin

  5. What purpose is served by a dorsal fin at high sideslip angles?
    • A) Decreases effectiveness of the fin in order to reduce lateral instability.
    • B) Decreases effectiveness of the fin in order to reduce Dutch roll.
    • C) Increases effectiveness of the fin by increasing its area.
    • D) lncreases effectiveness of the fin by reducing its aspect ratio.
    Show answer

    D) lncreases effectiveness of the fin by reducing its aspect ratio.
    At high sideslip angles, the vertical fin can approach its stalling angle of attack, reducing its effectiveness in providing directional stability. A dorsal (or ventral) fin helps prevent this by: Reducing the aspect ratio of the vertical surface. This raises the stalling angle of the fin, making it more effective during extreme yaw conditions. Thus, the main purpose of the dorsal fin is to enhance yaw stability when