About this topic
Technical R%D B*R#: 233 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from Technical R%D B*R#
- Choose the correct statement: 1. AFT CG limit is set to ensure a minimum degree static longitudinal stability 2. .FWD CG limit is set to ensure a minimum degree of controllability under the worst circumstances
- A) 1 is correct
- B) 2 is correct
- C) Both 1 & 2 are correct
Show answer
C) Both 1 & 2 are correct
- Swept back and Delta wings are:
- A) Very efficient at high supped but corresponding inefficient at low speeds
- B) Fairly inefficient at high speed but very efficient at low speed
- C) Neither efficient at low or high speed
Show answer
A) Very efficient at high supped but corresponding inefficient at low speeds
- The function of Shut off valve in a pneumatic system is to:
- A) Shut Off the pneumatic system
- B) To switch off bleed air supply from an engine and the APU
- C) To regulate the supply of bleed air
Show answer
B) To switch off bleed air supply from an engine and the APU
- Shock stall is caused is due to:
- A) Abrupt movement of the control column
- B) Sudden increase in lift
- C) Boundary layer separation aft of the shockwave causing sudden loss of lift
Show answer
C) Boundary layer separation aft of the shockwave causing sudden loss of lift
- The main contributory factors which cause creep in turbine blades are:
- A) High RPM and High gas speed.
- B) High Temperature and High gas speeds.
- C) High Temperature and Tensile loading
Show answer
C) High Temperature and Tensile loading