About this topic
VISUAL AIDS NAVIGATION: 50 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from VISUAL AIDS NAVIGATION
- Which of the following Annexes to the Chicago convention contains minimum specifications for the design of aerodromes?
- A) Annex 14
- B) Annex 11
- C) Annex 6
Show answer
A) Annex 14
Annex 1 – Personnel Licensing Annex 2 – Rules of the Air Annex 3 – Meteorological Services Annex 4 – Aeronautical Charts Annex 5 – Units of Measurement Annex 6 – Operation of Aircraft Annex 7 – Aircraft Nationality and Registration Marks Annex 8 – Airworthiness of Aircraft Annex 9 – Facilitation Annex 10 – Aeronautical Telecommunications Annex 11 – Air Traffic Services Annex 12 – Search and Rescue Annex 13 – Aircraft - "Clearway" is a defined rectangular area established to:
- A) Reduce the risk of damage to aircraft running off a runway
- B) Protect aircraft during take-off or landing operations
- C) Permit aircraft to make a portion of its initial climb to a specific height
Show answer
C) Permit aircraft to make a portion of its initial climb to a specific height
Clearway (CWY): A defined rectangular area on the ground or water under the control of the appropriate authority, selected or prepared as a suitable area over which an aeroplane may make a portion of its initial climb to a specified height. A clearway should extend laterally to a distance of at least 75 m on each side of the extended centre line of the runway. The ground in a clearway should not project over a plane - The STOPWAY is a defined rectangular area on the ground at the end of take-off run available prepared as a suitable area where:
- A) A landing aircraft can be stopped if overcoming the end of runway
- B) An aircraft can be stopped in the case of an abandoned ake-off
- C) A landing aircraft can be stopped only in emergency
Show answer
B) An aircraft can be stopped in the case of an abandoned ake-off
Stopway (SWY): A defined rectangular area on the ground at the end of takeoff run available prepared as a suitable area in which an aircraft can be stopped in the case of an abandoned takeoff. A stopway shall have the same width as the runway with which it is associated. A stopway should be prepared or constructed so as to be capable, in the event of an abandoned takeoff, of supporting the aeroplane which the stopway - "ASDA" (Accelerate Stop Distance Available) is:
- A) The length of the take-off run available plus the length of stopway and clearway (if provided)
- B) The length of the take-off run available plus the length of stopway(if stopway provided)
- C) The length of the runway plus the length of stopway available (if stopway provided)
Show answer
B) The length of the take-off run available plus the length of stopway(if stopway provided)
Takeoff Run Available (TORA): The length of the runway declared available and suitable for the ground run of an aircraft during takeoff. Takeoff Distance Available (TODA): The TORA plus the length of the clearway, if provided. This represents the total distance available for takeoff. Accelerate-Stop Distance Available (ASDA): The TORA plus the length of the stopway, if provided. This is the distance available for an - "Instrument runways" are the following runways intended for the operation of aircraft using instrument approach procedure:
- A) Non precision approach runways, precision approach runways category I, II and III
- B) Instrument approach runways, precision approach runways category I, II and III
- C) Precision approach runways category I, II and III
Show answer
A) Non precision approach runways, precision approach runways category I, II and III
Instrument Runway. An instrument runway is one to which instrument departure and approach procedures are applied. For departing traffic, the instrument departure procedure will be defined in the form of a SID. For arriving traffic, instrument runways are sub-divided into: • Precision runways (using ILS, MLS or PAR approaches) • Non-precision (using VOR, NDB, SRA or ILS in azimuth only approaches)